Questions? Call Orange County Speaker Repair
Shipping Your Speakers?
View Your Cart

0 items in your cart

8" Speaker Repair Kit Foam Re-edge Parts for KEF 103, 104, & 105 KEF 103/3, 104/2, & 105/3

8" Speaker Repair Kit Foam Re-edge Parts for KEF 103, 104, & 105 KEF 103/3, 104/2, & 105/3
Click for larger image.

    List Price: $99.95
    Our Price: $79.99
    You Save: $19.96 (20%)

    Part #: KEF104K
    Shipping Weight: 2.00 pounds
    Review Average: 5 out of 55 out of 55 out of 55 out of 55 out of 5 (4 customer reviews)
    Write a customer review.

    In Stock.

    Ships today if ordered within 5 hrs 41 mins.


    Login to add items to your Wish List.

    Credit Cards

    This is a brand new - fresh stock correct KEF 103, 104 ,& 105 foam surround Re-Edge Kit which includes the surrounds for the woofers as well as the center "donut" surrounds. This kit is NOT the generic "one size fits all" kit like others sell. This kit will make your aging, deteriorated KEF 103, 104 & 105 speakers sound just like new!

    This Re-Edge Kit includes all the materials needed to repair two (4) speaker drivers:

    * (4) Correct KEF 103, 104, & 105 8" Polyether Foam Surrounds (Best Quality Available!)
    * (4) KEF 103, 104, & 105 center dome with hole (donut)
    * (2) Adhesive Application Brush
    * (2) Bottle Specially Formulated Foam Surround Adhesive that Dries Clear
    * Step-By-Step Instructions with Picture Illustrations
    * Toll Free Technical Support

    This kit fits the KEF 103, KEF103, KEF-103, KEF 103/3, KEF103/3, KEF-103/3, KEF 103-3, KEF103-3, KEF-103-3, KEF 104, KEF104, KEF-104, KEF 104/2, KEF104/2, KEF-104/2, KEF 104-2, KEF104-2, KEF-104-2, KEF 105, KEF105, KEF-105, KEF 105/3, KEF105/3, KEF-105/3, KEF 105-3, KEF105-3, KEF-105-3.

    Instructions for disassembling KEF cabinets:

    * Use 5mm hex wrench to remove (4) bolts securing high/mid baffle to cabinet
    * Lift baffle and unplug harness from back of baffle
    * Set baffle aside
    * Remove 8 philips head screws from bottom panel
    * Remove bottom panel and unplug crossover (make note of wire colors and locations on crossover)
    * Set panel aside
    * Remove batting material from both bottom and top of cabinet to gain access to woofers
    * Unsolder wires to woofer leads (make note of wire colors to left/right side of speaker terminal)
    * Use 10mm socket to remove bolt from back of bottom woofer and front of top woofer
    * Remove (6) nuts from front of each woofer
    * Remove green foam if necessary
    * Remove top woofer through cutout in top of cabinet
    * Remove connecting rod
    * Remove bottom woofer through cutout in middle of cabinet

    If you have any questions about our Re-Edge Kits, please call us toll free at 1-800-897-8373 or send us an e-mail!

    If you would like us to repair your speakers please click here for price list and shipping instructions.

    Please note: This order form is for USA shipping addresses only. If you live outside the USA please click here to order the kit.

    Customer Reviews:

    Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 (4 reviews)
    Write an online review and share your thoughts with others.

    5 out of 55 out of 55 out of 55 out of 55 out of 5 The Kit is great, but there are some complications (10.21.2015)
    Reviewer: Yukon King
    I ordered and received the kit for my KEF104/2's in just a couple of days. The instructions were clear and disassemble of the speakers went fairly quickly. I found that the removal of the old foam and gluing in of the new was fairly straight forward but required a bit of patience, attention to detail and some innovation to get all the edges down and aligned long enough to bond. My real issue was soldering back in the leads to the lower speaker, working through the cutout and with minimal slack in the wires which come down from the top baffle and are epoxied through the hole. Once completed the speakers again function, have some bass again and look un-effected. All in all a good product which restores the great KEF104's to near original performance


    5 out of 55 out of 55 out of 55 out of 55 out of 5 Does the job! (1.2.2015)
    Reviewer: Karl
    Like most KEF 104/2s the surrounds and donuts were crumbling to dust. This kit was exactly what the doctor ordered to restore the low frequency drivers to an "as-new" condition. Note that if you've got this problem the tweeters are probably in need of a ferrofluid replacement as well. Do both and you have a pair of speakers that are hard to equal for under $3,000 in today's market -- save these rather than replace them for a fraction of the cost!


    5 out of 55 out of 55 out of 55 out of 55 out of 5 KEF 104/2 Woofer Refoam Project (8.16.2010)
    Reviewer: Terry Wetherbee
    My 104/2 woofers foam surrounds finally gave out so I quickly ordered Orange County's refoam kit before the voice coils destroyed themselves. Without the foam surrounds to hold the cone assembly motion pistonic, the coils will rub and quickly fail.

    The kit arrived in 2 days! I followed the directions closely and all four woofers are back in specification without any rubbing issues.

    Thank you Orange County Speaker. I have another 15 years of listening enjoyment ahead of me!


    4 out of 54 out of 54 out of 54 out of 54 out of 5 Good Kit (1.26.2010)
    Reviewer: Jim Sowder
    I found the materials provided to be first rate and complete. However, I had trouble with one of the four drivers. I have done a number of foam replacements, including the larger Advent and a pair of Bose 901s. The tolerances for the KEF drivers seems to be much tighter, making it difficult to center the cones by hand. After completing all four drivers, one of them scraped. I really need to redo it from scratch, but I carefully pried the outer foam off and reset it. It works now but looks messy.

    Also, because of the way the center foam works, it is necessary to lift the cone to glue the center. Maybe the center should be done first, but the instructions don't mention the center foam.

    At any rate, I've tested the results with some bass heavy rock music and some pipe organ music having very low bass. I don't detect any scraping in actual listening. I should say that I don't listen at high volumes. I turned up a Bob Seger album to as high as my wife would allow and heard no misbehavior. For future reference I would recommend that first timers consider having KEF drivers done by Orange county. It costs a bit more, but these speakers are worth repairing at almost any cost.

    I would give technical support five stars. The procedure for removing these drivers is not obvious, and the Orange County technician was able to give me clear and complete instructions.


    Contact Us

    Contact Us!

    Please enter your question below and we will reply within one business day. You may also contact us by phone at 1-800-897-8373 (Monday through Friday 9am to 5pm Pacific time).